Open Access Pub publishes peer-reviewed, free-to-read open-access articles. Showing
articles matching Implants — open any to read the full text,
or download the PDF or XML.
Feb 2026 DOI 10.14302/issn.2473-1005.jdoi-25-5935
Romulus Calin FodorCorresponding author
The aim of this article is to present alternative possibilities for corrective intervention using corticobasal implants, following the failure of treatment with two stage implant in cases of extensive edentulism, multi-segmented edentulism, and the development of peri-implantitis 1 at the level of these implants. For this purpose, a case was selected involving a patient treated with two stage implants in a multi-segmented manner, in the distal regions of the maxilla and mandible, where the implants were affected after 12 years by peri-implantitis in proportions ranging from 20% to 100% in different areas of bone, with a predominance in the vestibular area. The decision was made to remove the affected two stage implants, as well as the remaining deciduous teeth, with or without periodontal conditions, but whose position on the arch made improperly rehabilitation, both functionally and aesthetically impossible, and made the second rehabilitation with polished corticobasal and compressive implants in immediate loading 2. Function and aesthetics of the gnathological apparatus were restored through definitive fixed metal-ceramic prosthetics on the support of corticobasal and compressive implants within 4 days from the beginning of the treatment, with the result being monitored over a period of 3 years and 3 months, and this evaluation is to continue over time. From a surgical perspective, for secondary rehabilitation with polished corticobasal and compressive implants, strategic positions in the maxillary and mandibular bones were used as follows: the fusion area of the maxillary bone with the sphenoid bone, the nasal cortex, the sinus cortex the lingual cortex distal to the mylohyoid line, and the interforaminal mandible area.34 These areas correspond to methods described in Consensus Number 6 in the IF The Foundation of Knowledge 5. In conclusion, the treatment with corticobasal, compressive polished implants is successful even in the case of a difficult clinical scenario like the one described for this patient 6. The reduced treatment time, along with the absence of the need for sinus lifts or bone grafts, makes it the ideal solution in any situation. The use of corticobasal implants, with fixation in the second/third cortical layer and an immediate loading protocol, should represent the primary solution in treating cases with poor bone representation, and no only as a “Corrective Intervention with Corticobasal® Implants”7.
Aug 2019 DOI 10.14302/issn.2473-1005.jdoi-19-2908
Singh KunwarjeetCorresponding author
Professor, Department of Prosthodontics, Dental materials and Implantology, Institute of Dental Studies and Technologies, Modinagar, Ghaziabad, Uttar Pradesh, INDIA.
The main purpose of the impression is to record and transfer the relationship between implants and to reproduce this relationship as accurately as possible. But, Unplanned placement of the implants may result in close approximation of the implants, thereby posing tough challenge to the restorative dentist, to first accurately record the impression and later on fabricate the prosthesis with satisfactory esthetics and function. This article presents a modified direct impression coping procedure for precise making of impression of closely placed implants which otherwise may be difficult to replicate the exact position of the implants by conventional direct or indirect technique.
Nov 2016 DOI 10.14302/issn.2473-1005.jdoi-16-1326
Szuhanek CameliaCorresponding author
Department of Orthodontics, Faculty of Dental Medicine, University of Medicine and Pharmacy “Victor Babes”, Timisoara
This case report describes the treatment of a dento-alveolar protrusion with anterior open bite. The 21-year old patient had a convex profile , class I dental malocclusion , anterior open bite of 4 mm and presented tongue thrust. The treatment plan was to insert two mini-implants for premolar intrusion along with the straight –wire fixed appliances. Tongue therapy was performed by myofunctional exercises. Using the absolute anchorage we were able to achieve our goals in a predictable manner without the use of orthognathic surgery or patient compliance . After the tongue thrust habit was removed we are confident that this is a stable result .
Dec 2015 DOI 10.14302/issn.2473-1005.jdoi-15-742
Fortes Ferreira CimaraCorresponding author
Assistant Professor, Department of Prosthodontics, UTHSC, Memphis, TN, USA.
This case report details reconstruction of a severely atrophic pre‑maxilla using rhBMP‑2 and a titanium mesh framework. Surgical technique, graft outcomes, and implant rehabilitation are described, with notes on indications and complications.
Apr 2026 DOI 10.14302/issn.2473-1005.jdoi-26-6170
Y. S. Lee CameronCorresponding author
For the edentulous patient, dental implant therapy is the accepted treatment to replace one or more missing teeth as implant survival rates are greater than 90%. Unfortunately, surgical removal of dental implants occurs for a variety of reasons. As human studies are limited, this case report provides an opportunity to evaluate the peri-implant characteristics in a dental implant removed from a patient using histology. In our patient, the implant was removed three years after completion of the prosthetic phase due to fracture of the abutment that could not be removed from the implant. Histological examination of the implant revealed mature lamellar bone in direct contact with the implant surface. Histomorphometric evaluation revealed a bone-to-implant contact (BIC) of 73.6%.
Dec 2025 DOI 10.14302/issn.2473-1005.jdoi-25-5870
Arthur Ferreira RibasCorresponding author
This narrative literature review investigates the clinical feasibility of maxillary sinus lift using the lateral window (or traumatic) technique, employing a grafting material composed of hydroxyapatite associated with beta-tricalcium phosphate. The study is based on the premise that bone resorption and sinus pneumatization—common in edentulous posterior maxillae—pose a challenge to achieving primary stability during dental implant placement. Given the limitation imposed by reduced residual bone height, bone-grafting surgical techniques become necessary to enable implant-supported rehabilitation. The objective of this work is to analyze, through a literature review, the efficacy of combining synthetic biomaterials as an alternative to autogenous bone grafts, which are considered the gold standard in implant dentistry. A bibliographic search was conducted in the PubMed and LILACS databases and through the VHL portal, prioritizing articles addressing the biological properties of alloplastic grafts, the indications of the lateral window technique, and the clinical success rates of implants placed in previously grafted areas using such materials. The findings demonstrated that hydroxyapatite associated with beta-tricalcium phosphate exhibits favorable osteoconductive characteristics, such as adequate porosity and gradual resorption, while allowing the formation of viable bone within a clinically acceptable timeframe. The combination of these materials eliminates the need for a second surgical site, reduces morbidity, and maintains treatment predictability. It is concluded that the lateral window technique associated with synthetic biomaterials is a safe and effective alternative for patients with maxillary bone atrophy, capable of promoting suitable bone beds for dental implant placement and stabilization, with lower surgical risk and satisfactory clinical outcomes.
Nov 2021 DOI 10.14302/issn.2473-1005.jdoi-21-3988
Muhamad Abu-HusseinCorresponding author
Practice limited to Children's Dentistry, Aesthetics Dental Clinic, Athens, Greece
Edentulism is considered a poor health outcome and may compromise quality of life. Implant-supported overdentures provide a good opportunity for dentists to improve the quality of life and oral health. Atrophic mandible poses a significant challenge to successful oral rehabilitation with dental implants. The aim of this case report is to demonstrate the concept of immediate functional loading in the mandible using unsplinted implants to support a locator attachment supported overdenture.
Feb 2021 DOI 10.14302/issn.2372-6601.jhor-21-3733
Qing XinCorresponding author
Department of Pathology, Harbor-UCLA Medical Center, 1000 West Carson Street, Torrance, CA 90502, USA.
Breast implant-associated anaplastic large cell lymphoma (ALCL) is a recently recognized type of T-cell lymphoma that can develop following breast implants, with morphologic and immunophenotypic features indistinguishable from those of ALK-negative ALCL. Here we report a case of a 58-year-old woman with a history of subglandular silicone implants placed for bilateral breast augmentation 25 years ago, who presented with bilateral breast pain and was found to have bilateral Baker Grade III capsular contracture, and heterogenous fluid collection centered near the left third costochondral articulation, a suspicious left chest wall lesion, and left axillary lymphadenopathy on imaging. A left axillary lymph node core biopsy and an aspiration of the fluid were performed, and no malignant cells were identified. The patient underwent bilateral removal of breast implants and total capsulectomies. Microscopic examination of the capsule surrounding the left breast implant revealed large pleomorphic tumor cells in a fibrinous exudate. By immunohistochemistry, the tumor cells were found to be positive for CD3 (subset), CD4, CD7, CD30 (strong and uniform), and CD43, and negative for CD2, CD5, CD8, and ALK1, supporting the diagnosis of breast implant-associated ALCL. No lymphoma cells were identified in the right breast capsule, confirmed by CD30 stain. Breast implant-associated ALCL is a very rare disease that can develop many years after breast implant placement. Proper evaluation with breast imaging and pathologic workup is essential to confirm the diagnosis in suspected cases. Our case highlights that adequate sampling is important in the investigation of patients with suspected breast implant-associated ALCL.
Dec 2020 DOI 10.14302/issn.2473-1005.jdoi-20-3659
C SzuhanekCorresponding author
Department of Orthodontics, Faculty of Dental Medicine, University of Medicine and Pharmacy ‘Victor Babes’, Timisoara, Romania
Open bite malocclusion, due to it’s multifactorial etiology, has always been considered a difficult problem to treat. Often associated with transverse maxillary deficiency, this is a real challenge in the field of orthodontics. The traditional approach, for this type of anomaly, in adult patients, is orthognathic surgery and RME (rapid maxillary expansion). There are several approaches to the treatment of adult patients using digital technology. Mini-implant supported palatal expander limits the side effects of the conventional RME and is less invasive compared to orthognathic surgery. Precise and predictable mini-implant insertion, using a customized surgical guide, provides a safe therapeutic approach. This case report combines Cone-beam computed tomography (CBCT), laser scan superimposition, computer-aided design (CAD) and 3D printing in order to design and print a customized surgical guide for orthodontic mini-implant insertion. A CBCT scan was performed to determine the optimal site for mini-implants’ placement. Using the 3Shape Trios Intraoral Scanner the maxilla and the mandible were laser-scanned. Blue Sky Plan 4 software was used to design the surgical guide, and RayWare software was used for printing it. 4 mini-implants were inserted using a safe and predictable technique. The 3D technology represents the future of orthodontics, reducing the risks, chair-side time while providing the best treatment plan for the patient.
Jul 2020 DOI 10.14302/issn.2831-8846.j3dpa-20-3438
Shirbhate NimishaCorresponding author
Department of Mechanical Engineering, LT College of Engineering, Koparkhairne, Navi Mumbai, India
Bone Scaffold is a three-dimensional porous construction which provides support to promote natural cell growth in damaged or broken section of bone. In recent years researchers from various departments like biomedical, mechanical, orthopedics, have shown significant interest in adopting ‘Bone Scaffolds’ as a promising treatment for bone defects. ‘Bone Scaffold’ is a honeycomb-like architecture composes of bio-compatible material having grater advantages over current grafting solution. In this paper, the authors try to review the available e-articles in an organized way on the bone scaffold in the field of biomedical implants with 3D printing. The selected literature mainly focuses on the biocompatible material and various advanced manufacturing methods used for manufacturing / preparing of bone scaffolds. This article tries to padding the gap between theoretical and actual implementation of ‘Bone Scaffolds’ by properly analyzing selected research and allowing future opportunities for reinventing the new possibilities in the field of biomedical.
Dec 2019 DOI 10.14302/issn.2372-6601.jhor-19-3092
S. Tsingotjidou AnastasiaCorresponding author
Laboratory of Anatomy, Histology and Embryology, Faculty of Veterinary Medicine, School of Health Sciences, Aristotle University of Thessaloniki, Thessaloniki, GR-541 24, Greece
Waldenström Macroglobulinemia (WM) is a B-cell lymphoproliferative disorder characterized mainly by uncontrolled accrual of M- immunoglobulin, secreted by malignant lymphoplasmatic cells. Mast cells interacting with malignant B-cells play an important role at the manifestation of the disease. Utilizing a previous xenotransplantation mouse model, this study evaluates long-term implant viability and quantifies distinct bone marrow mast cell populations along with their dynamics in non-WM and WM human bone implants. Non-WM bone implants were obtained from the femoral head of adult humans undergoing hip arthroplasty or hemiarthroplasty, whereas WM human bone implants originated from bone biopsies obtained from the posterior iliac crest of patients with active WM. All bone particles were implanted intramuscularly in twenty-four NOD/SCID mice. Following 3, 4 or 8 months postoperatively, xenografts were removed and studied using special histological techniques to identify mature and immature mast cells. Xenografts survived up to 8 months after implantation presenting normal cytoarchitecture (non-WM) or high-grade neoplastic infiltration and microresorption (WM bone biopsies). Statistical analysis of mast cell populations showed significant elevation regarding time progression and bone marrow microenvironment, thus suggesting the possible influence of malignant cells to the mast cell population in WM. This study presents the extended survival of intramuscular implantation of human adult bone xenografts into NOD/SCID mice and provides additional information on the interaction between mast cells and malignant B-cells.
Feb 2019 DOI 10.14302/issn.2473-1005.jdoi-17-1745
Szuhanek CameliaCorresponding author
Department of Orthodontics, Faculty of Dental Medicine, University of Medicine and Pharmacy “Victor Babes”, Timisoara
Mini screws represent a new treatment modality in orthodontic biomechanics. They provide absolute anchorage, no secondary movements and reduced orthodontic treatment time. Futhermore, the surgical procedure for mini implants placement is quite simple and this type of treatment requires no patient compliance. We selected a clinical case in order to emphasize one of the most important indications of the mini implants: retrusion of the upper incisors for a incresed overjet case in a young patient. Two mini implants were placed in order to obtain the correction of the overjet and the retrusion of the anterior teeth. The retrusion was obtained in a reduced period of time using retraction devices on crimpable hooks.
Feb 2019
P Dargan DallanCorresponding author
Mersey Regional Burns and Plastic Surgery Centre, Whiston Hospital, Warrington Road, Prescot, Merseyside, L35 5DR, United Kingdom
Background: Chest wall deformities may be managed with skeletal manipulation, which risks life-threatening complications. Custom-made prostheses are a less invasive surgical option, manufactured from silicone elastomer using 3D computed tomographic reconstruction and 3D-printed thoracic models. Methods: All patients undergoing custom-made implants between January 2010 and March 2017 were identified from the prosthetic department records. A retrospective review of the clinical records was performed. Mean follow up period was 1.8 years. A comparison was made with our earlier results from 1995 to 2009. Results: Twenty-six patients underwent insertion of custom-made implants for chest wall deformity. Pectus excavatum was present in 50% (n=13), and Poland syndrome 42% (n=11). All 11 female patients underwent 3D reconstruction and 3D printed models, and 3 of 15 males. Four underwent simultaneous bilateral breast augmentation, and three had staged breast augmentation. Seroma occurred in 27% (n=7), and hypertrophic scar in 12% (n=3). The reoperation rate was 23% (n=6), including autologous fat graft in two patients. Surgical suction drains were used in 42% (n=11) patients, of whom 36% (n=4) developed seroma, compared with 17% (n=2) of those without drains (p=0.08). Conclusions: Custom-made prostheses are an effective and safe option for patients with chest wall deformities. The majority have a short postoperative inpatient stay (81%) and are satisfied with the outcome (77%). Seroma was the commonest complication (27%), and drains did not reduce seroma risk. Single dose intravenous antibiotic prophylaxis is adequate. A minority of patients opt for further aesthetic procedures.
Jul 2018 DOI 10.14302/issn.2831-8846.j3dpa-18-2207
Dehghanghadikolaei AmirCorresponding author
Oregon State University, USA
Additive manufacturing (AM) is reshaping fabrication in engineering and clinical settings. This editorial highlights metal AM routes—SLS, SLM, DMLS, and EBM—and their application to patient-specific NiTi implants, where biocompatibility and shape-memory behavior are compelling. We note the current gaps that matter in practice: process parameter tuning, post-processing (heat treatment, coating, machining/finishing), and their effects on mechanical performance and corrosion. We invite contributions that quantify these trade-offs and expand AM beyond metals into polymers and ceramics, with clear comparisons across processes and materials. Our goal is to surface actionable findings that improve part quality, reliability, and clinical/industrial readiness.
Dec 2017 DOI 10.14302/issn.2640-6403.jtrr-17-1840
Rogina AnamarijaCorresponding author
Faculty of Chemical Engineering and Technology, University of Zagreb
Up till now, chitosan has confirmed its versatile application in skin, cartilage and bone tissue engineering, as well as in drug delivery applications. This study is focused on enzymatic degradation of porous chitosan structures usually designed for mentioned purposes. In vitro degradation was monitored during four weeks of incubation at physiological temperature and in two different media, phosphate buffer saline solution and water. The scaffolds were characterised before and after enzymatic degradation using scanning electron microscopy and infrared spectroscopy with Fourier transformations (FTIR). According to the gravimetric analysis, higher weight loss of chitosan scaffolds was observed in buffered medium with respect to the water. The results implied that the total weight loss obtained in buffer involves physical dissolution of chitosan and lysozyme cleavage of glycoside bond. Importantly, FTIR identification of chitosan scaffolds after enzymatic degradation indicated the absence of lysozyme activity in water, indicating that weight loss is a result of the chitosan dissolution. This finding greatly impacts design of degradation experiments and characterisation of degradation behaviour of chitosan-based materials utilised as implants or drug delivery systems.
Sep 2016 DOI 10.14302/issn.2473-1005.jdoi-16-1196
Singh Nayyar AbhishekCorresponding author
Reader, Department of Oral Medicine and Radiology, Saraswati-Dhanwantari Dental College and Hospital and Post-Graduate Research Institute, Parbhani, Maharashtra, India
Background and Context: Autologous bone grafts require a second surgical exposure to harvest the graft with a significant risk of post-operative complications and donor site morbidity. Employment of allografts potentially eliminates donor site morbidity but carries the potential of causing foreign body immune reactions with a high rate of rejection and failures. Hence, Alloplasts have emerged as novel materials to overcome the drawbacks of autogenous and allogenous bone grafts. Today’s advanced dentistry is enterprising a putty form of calcium phosphosilicate (CPS) into several aspects of reconstructive domain of dentistry including the sinus augmentation procedures, osseous regeneration of periodontal bone defects, cystic cavity defects and alveolar socket preservation. This eccentric multifaceted study was planned as an honest effort on the path of proving the efficiency of CPS as an alloplastic bioactive graft material and aimed at quantitative evaluation of regenerated bone radiographically using Cone Beam Computed Tomography (CBCT) scans following sinus augmentation procedures. Materials and Methods: A total of 20 sinus augmentations were carried-out in 17 patients satisfying the criteria (inclusion and exclusion) requiring placement of implants in atrophic maxilla and in other situations of anatomic constraints. The graft material used was calcium phosphosilicate (CPS) putty (Nova bone dental putty, Novabone products, Alachua, Fla). The residual bone height was recorded using CBCT scans and a computer based software where the measurements were made from the crest of the ridge till the sinus floor lining. The patients were assessed clinically at immediate post-operative, 1 week, 1 month, 3 months and 6 months follow-up recalls post-operatively. Radiographic assessment for bone height was done pre-operatively and at 6 months follow-up recall post-operatively using Cone Beam Computer Tomography scans. Results: The post-treatment bone height (11.76+0.97mm) was found to be significantly higher than the pre-treatment bone height (6.8 +0.70mm) in indirect sinus augmentation procedures (t=14.4, p<0.005). In case of direct sinus augmentation group also, the post-treatment bone height (11.27 +0.71mm) came-out to be significantly higher than the pre-treatment bone height (2.44 +0.81mm) (t=32.17, p<0.005). The post-treatment bone grafted sinus floor measurements (1107.6 + 155.6mm) were also found to be significantly higher than the original sinus floor measurements of bone density (Grayscale values) (412+ 65.5mm) (t=16.6, p<0.001) in case of indirect sinus augmentation procedures. Similarly, the post-treatment bone grafted sinus floor measurements (1169.6+136.7mm) were found to be significantly higher than the original sinus floor measurements of bone density (Grayscale values) (416.4+ 0.70mm) (t=17.9, p<0.001) in case of direct sinus augmentation group. Conclusion: Calcium Phosphosilicate (CPS) was accepted well at the recipient sites without any complications demonstrating its efficiency and reliability in sinus augmentation procedures.
Jul 2016 DOI 10.14302/issn.2473-1005.jdoi-16-999
Amato FrancescoCorresponding author
Clinical Professor Master of Periodontology Universitat International the Catalunya, Barcelona, Spain. Private Practice, Catania, Italy; Viale A. De Gasperi 187, Catania, Italy.
Purpose: The aim of the study was to analyze the spatial relationship between the sinus floor and the alveolar bone of maxillary premolars and molars in order to assess the amount of basal bone available for immediate extraction placement of endosseous implants. Materials and Methods: All the cone-beam computerized tomographic (CBCT) scans taken over a three-year period at four centers were identified. The subsinus bone height (SBH) was evaluated by measuring the distance between the sinus floor and the first and second premolar root apexes. The interradicular septum bone height (ISBH) of all the first and second molars was also measured, and the presence or absence of sinus-floor invagination between the molar roots was recorded. Results: Five hundred twenty-six (526) CBCT scans of fully or partially dentate maxillary arches were examined. The root apex was inside the sinus of 1.8% of all the first premolars. It approximated the sinus floor of 5.3% of them, and the distance between the two points was between 1 and 3mm of 20%, between 3 and 7mm for 34.1%, and more than 7mm for 34.1%. For the second premolars, the findings were 13.5% (inside the sinus), 10.5% (touching the sinus), 32.8% (1-3mm of distance) 28% (3-7 mm), and 15.2% (more than 7mm). Root invagination was noted in 50.2% of the first molars and 43.1% of the second molars, with the ISBHs ranging from 13.4% to 56.9%. Conclusion: Radiological evaluation is essential to determining whether implants should be placed immediately after extraction of maxillary premolars and molars.